ROJ to IEC-60320-C7
Item# 0026.072
6’ 18/2 NISPT-1 + H03 B I C7 TO ROJ
SPECIFICATIONS
PRODUCT INFO
- Our 0026 series features an ROJ with the IEC-60320-C7 Connector.
- These 2-conductor power cords are standard cords used for un-grounded laptops, notebooks, stereos, game consoles, electric razors, and many more devices. On the supply end they hard-wire directly into your power supply, and on the other they connect to any device using the IEC-60320-C8 Inlet. The IEC-60320-C7 is also referred to as the Figure-8 connector.
- An ROJ, or Removed Outer Jacket, is the result of stripping the exterior jacket from the power cord and exposing the conductors for the purpose of hard-wiring the cord into your equipment. Our standard ROJ includes the removal of 2 inches (51mm) of jacket and of 1/4 inch (6mm) of conductor insulation.
- Non-integral wire means that the inner conductors have their own insulation, in addition to an outside jacket around the inner insulation.
- The 0026.072 carries the UL and C-UL approvals and is rated at 10A - 250V.
- This North American power cord can also be used in the following countries:
Bahamas | Jamaica |
Barbados | Laos |
Belize | Mexico |
Canada | Micronesia |
Cayman Islands | Nicaragua |
Costa Rica | No. Mariana Island |
Cuba | Palmyra Atoll |
Dominican Republic | Panama |
Ecuador | Peru |
El Salvador | Philippines |
Guam | Puerto Rico |
Guatemala | Thailand |
Haiti | Venezuela |
Honduras | Virgin Islands |